SCR ELECTRONICS PVT. LTD.
@SCR12
2 Station HV Inclined Plane Tracking and Erosion Test Equipment for Insulating Materials - With PC Datalogging
The equipment covers the evaluation of the relative tracking and erosion resistance of insulating solids using the liquid contaminant designed as per standard ASTM D2303
Tests included:
• Time to track method
• Initial tracking voltage
• Erosion test
Different models such as Single station, 2 Stations, 5 Stations are available.
Category: Electronic Components & Supplies
Sub-Category: Other Electronic Components
2 Station HV Inclined Plane Tracking and Erosion Test Equipment for Insulating Materials - Without PC Datalogging
The equipment covers the evaluation of the relative tracking and erosion resistance of insulating solids using the liquid contaminant designed as per standard ASTM D2303
Tests included :
• Time to track method
• Initial tracking voltage
• Erosion test
Different models such as Single station, 2 Stations, 5 Stations are available.
Category: Electronic Components & Supplies
Sub-Category: Other Electronic Components
5 Station HV Inclined Plane Tracking and Erosion Test Equipment for Insulating Materials - With PC Datalogging
The equipment covers the evaluation of the relative tracking and erosion resistance of insulating solids using the liquid contaminant designed as per standard ASTM D2303
Tests included:
• Time to track method
• Initial tracking voltage
• Erosion test
Different models such as Single station, 2 Stations, 5 Stations are available.
Category: Electronic Components & Supplies
Sub-Category: Other Electronic Components
Tracking Index Test Machine from SCR ELEKTRONIKS is a popular product for checking compliance of solid insulating material as per IEC 60112, UL 746A, ASTM D3638 and DIN 53480. With a high voltage applied between two platinum electrodes, the solid insulating part is placed such that there is a 4mm gap between the electrodes touching the insulating material under test. The high voltage is settable up to 600V or 1200V depending on model. Drops of contaminant are poured on to the electrodes while voltage is applied. With time, it’s evaluated on the criteria outlined in IEC 60112 or the equivalent national standard with which the insulating material is required to comply with.
The tracking index test provides an accelerated simulation of conditions of surface discharges and possible resulting tracking and failure in equipment using insulating materials. This test also provides a means to compare insulating materials performances under wet and contaminated conditions.
This test apparatus is covered in IEC 60112 and commonly referred for various devices in many standards such as IEC 60335 - 1, IEC 61058 - 1 , IEC 60065, IEC 60669 - 1, IEC 60884 - 1, IEC 60950 - 1, IEC 61010 - 1 , IEC 60598 - 1,IEC 60320 - 1 IEC 60898 - 1, IEC 60400, IEC 60238, IEC 60730 - 1, UL746A , ASTM D3638 and DIN53480.
Category: Electronic Components & Supplies
Sub-Category: Other Electronic Components
Tracking Index Test Machine from SCR ELEKTRONIKS is a popular product for checking compliance of solid insulating material as per IEC 60112, UL 746A, ASTM D3638 and DIN 53480. With a high voltage applied between two platinum electrodes, the solid insulating part is placed such that there is a 4mm gap between the electrodes touching the insulating material under test. The high voltage is settable up to 600V or 1200V depending on model. Drops of contaminant are poured on to the electrodes while voltage is applied. With time, it’s evaluated on the criteria outlined in IEC 60112 or the equivalent national standard with which the insulating material is required to comply with.
The tracking index test provides an accelerated simulation of conditions of surface discharges and possible resulting tracking and failure in equipment using insulating materials. This test also provides a means to compare insulating materials performances under wet and contaminated conditions.
This test apparatus is covered in IEC 60112 and commonly referred for various devices in many standards such as IEC 60335 - 1, IEC 61058 - 1 , IEC 60065, IEC 60669 - 1, IEC 60884 - 1, IEC 60950 - 1, IEC 61010 - 1 , IEC 60598 - 1,IEC 60320 - 1 IEC 60898 - 1, IEC 60400, IEC 60238, IEC 60730 - 1, UL746A , ASTM D3638 and DIN53480.
Category: Electronic Components & Supplies
Sub-Category: Other Electronic Components
Dry Arc Resistance Tester is designed to conduct high voltage, low current arc Resistance test on solid electrical insulation material as per:
1) ASTM standard D495-99 (2004)-“Standard Test method for High – Voltage / Low-Current, Dry Arc Resistance of solid Electrical Insulation”
2) UL 746A “Testing for electrical properties.” This product is meant for all insulator/ polymer/electro plastic manufacturers and appliance manufacturers that use insulators in their products.
Many Cases of insulator failure are due to deterioration of its surface because of sustained electrical discharge or Arc. This test method is intended to test the resistance of insulating material when a high -Voltage low -current Arc close to the surface of insulation, intending to form a conducting path therein or in causing the material to become conducting due to decomposition and erosion.
This Test ensures that your products meet high standards of quality & safety. This product is meant for all Switchgears/insulator/Polymer/electro plastic manufacturers and manufacturers who use insulators in their products e.g. Wiring Accessories, Appliances, HT/LT line insulators etc.
Category: Electronic Components & Supplies
Sub-Category: Other Electronic Components
Dry Arc Resistance Tester is designed to conduct high voltage, low current arc Resistance test on solid electrical insulation material as per:
1) ASTM standard D495-99 (2004)-“Standard Test method for High – Voltage / Low-Current, Dry Arc Resistance of solid Electrical Insulation”
2) UL 746A “Testing for electrical properties.” This product is meant for all insulator/ polymer/electro plastic manufacturers and appliance manufacturers that use insulators in their products.
Many Cases of insulator failure are due to deterioration of its surface because of sustained electrical discharge or Arc. This test method is intended to test the resistance of insulating material when a high -Voltage low -current Arc close to the surface of insulation, intending to form a conducting path therein or in causing the material to become conducting due to decomposition and erosion.
This Test ensures that your products meet high standards of quality & safety. This product is meant for all Switchgears/insulator/Polymer/electro plastic manufacturers and manufacturers who use insulators in their products e.g. Wiring Accessories, Appliances, HT/LT line insulators etc.
Category: Electronic Components & Supplies
Sub-Category: Other Electronic Components
The system will be specially designed to carry out Test as per IEC 60903:2014 Clause No. 5.8.2.
this instrument performs the flame retardancy test on glove parts or similar material.
Category: Electronic Components & Supplies
Sub-Category: Other Electronic Components
Glow wire test apparatus is the commonly used equipment for testing solid insulating material for fire hazard testing. This test apparatus is covered in IEC 60695-2-10:2021 and commonly referred for various devices in many standards such as IEC 60335, IEC 60695-2-11, IEC 60695-2-12, IEC 60598-1, IEC 60947, IEC 60898, IEC 61008-1, IEC 60669-1, IEC 60884-1, IEC 60950-1 / IS 13252, IEC 60238, IEC 60745-1, IEC 60400, IEC 60730-1, IEC 61050, IEC 60320-1, IEC 61058-1, ASTM D 6194-03 and UL 60745-1.
The test is carried out to asses the flammability characteristics of a Product body, typically made up of thermoplasts and thermosets. The glow wire tester is an important tool not just to assess the quality of the Product, but also to continuously check the incoming components related to the Product body for their flammability characteristics. Material moulds manufacturers can use this product to ascertain the quality of the Material under test
Category: Electronic Components & Supplies
Sub-Category: Other Electronic Components
The equipment is commonly used for testing of solid insulating materials. This test apparatus is covered in IEC 60695-2-10 and commonly referred for various devices in many standards such as IEC 60335, IEC 60695-2-11, IEC 60695-2-12, IS 11000, IEC 60598-1, IEC 60947, IEC 60898, IEC 61008-1, IEC 60669-1, IEC 60884-1, IEC 60950-1 / IS 13252, IEC 60238, IEC 60745-1, IEC 60400, IEC 60730-1, IEC 61050, IEC 60320-1, IEC 61058-1, ASTM D 6194- 03
As per IEC 60695-2-10 (Glowing/hot-wire based test methods – Glow-wire apparatus and common test procedure), parts of solid insulating materials are ignited by glowing wires. A nickel/chromium wire is heated to 960°C and the insulating material is pushed against it with a force of 1 N. It is checked that the insulating material does not attain a certain temperature or catches fire so as to prevent fire hazard in their vicinity
Category: Electronic Components & Supplies
Sub-Category: Other Electronic Components
High Voltage Inclined Plane Tracking And Erosion Tester For Insulating Materials - Single Station PC Based
The equipment covers the evaluation of the relative tracking and erosion resistance of insulating solids using the liquid contaminant designed as per standard ASTM D2303
Tests included :
• Time to track method
• Initial tracking voltage
• Erosion test
Different models such as single station, 2 Stations, 5 Stations are available.
Category: Electronic Components & Supplies
Sub-Category: Other Electronic Components
The equipment covers the evaluation of the relative tracking and erosion resistance of insulating solids using the liquid contaminant designed as per standard ASTM D2303
Tests included :
• Time to track method
• Initial tracking voltage
• Erosion test
Different models such as Single station, 2 Stations, 5 Stations are available.
Category: Electronic Components & Supplies
Sub-Category: Other Electronic Components
High-Current Arc Ignition Test Machine is used for evaluating Ignition Performance Level Category as per UL 746A. Any insulating material should resist electrical arcing when a high current tries to make path between a short distance that is only ‘connected’ by insulating surface. This is a requirement as per IEC 60947 - 1, BS EN 60950 - 1 and IEC 60335 - 2 - 40. Thus, it is a basic electrical safety requirement for all components such as cables, or for that matter any device employing an insulation such as polymers or polycarbonates.
This test apparatus is to be used in addition to High-Voltage Inclined Plane Tracking and Erosion Test Equipment
Category: Electronic Components & Supplies
Sub-Category: Other Electronic Components
The HWI test indicates a materials resistance to ignition when exposed to abnormally high temperatures resulting from a component failure such as a conductor carrying far more than its rated current. HWI performance is expressed as the mean number of seconds required to ignite a specimen when wrapped with an energized non-chrome resistive wire that dissipates a specified level of energy.
Category: Electronic Components & Supplies
Sub-Category: Other Electronic Components
Needle Flame Test Apparatus is the commonly used equipment for Fire Hazard testing for solid insulating materials. This test apparatus is covered in IEC 60695-11-5 and commonly referred for various devices in many standards such as IEC 60335-1, IEC 60695-11-3, IEC 60695-11-10, IEC 60695-2-2, IEC 60598-1, IEC 60512-20-1, IEC 60749-32, ASTM D635-18, UL 94, UL 1694, BS 6458, and IS 11000-2-2.
As per IEC 60695-11-5, the test specimen is arranged in a position of normal use such that ignition is most likely to occur during the test. The test flame (12 mm±1mm) is applied to the surface of test specimen and removed after the specified time. In case of ignition of the test specimen the duration of burning is measured. The test specimen is considered to have satisfactorily withstood the needle flame test if there is no flame and no glowing of the test specimen and no ignition of specified layer also flames or glowing of the test specimen extinguish within 30s after the removal of needle-flame
The needle flame test determines the effect of a small flame which may result from fault conditions
Category: Electronic Components & Supplies
Sub-Category: Other Electronic Components
This is a laboratory tester designed to simulate the growth of vented water-trees in the solid dielectric insulating material initiated by a sharp protrusion at the insulating and conductive interface under a wet environment in a high electrical field.
The system comprises, Power Source, Siemens make PLC and Water Bath.
Category: Electronic Components & Supplies
Sub-Category: Other Electronic Components
« »